|
|
Crimping
connectors with the Stanley Hydraulic Tools CT Series crimpers is
quick and easy. They are 5-10 times faster than hand-pumped tools and more than
twice as fast as high pressure double acting crimpers. The CT Crimpers require
no booster or intensifier which means they can be operated directly from the
hydraulic circuits already installed on your line trucks, or from a dedicated
power unit, or from one of the STANLEY® lightweight, portable HP Power Units.
Swivel Design on all models provides 360° continuous rotation of the die
head for easy alignment to give higher quality crimps.
1650 Models allow the use of the CT on almost any hydraulic system of at
least 1,650 psi (114 bar). An accurate, built in relief valve ensures that at
these system pressures and higher, a full die load is achieved preventing
over-crimping.
|
CT04
STANLEY® SE4 |
|
CT04 SE4 Crimping Tool
|
CT04 STANLEY® SE4 is a small and lightweight tool ideal for service
entrance termination and underground crimping. It accepts 90% of
available service entrance connectors and accommodates wires up to 4/0
in (13 mm) diameter. It is compatible with the following tooling and die
application:
|
-
Anderson, VC6-L, VC6-L-SN, VC6-LU,
VFC6-LR, VC6-LR-SN, ND58-OL
-
Burndy, MD-6-8, MD6R, MD6-6R, MD6-6R-2,
MD6-AH48, MD6-6AH48 and MD6-8AH48
-
Huskie, CN58,CN58H, CN-258, REC-58 (“W”
dies), FND-0, ND-0, ND-BG
-
Kearney, 0-51 and 0-52, PH-1
|
| For more detailed
information, click here.
1650 CT
Series Specification Sheet. |
|
CT06
Anderson |
|
CT06 Crimping Tool
|
CT06 Anderson uses an Anderson Die-Less head
designed for use with Anderson-style connectors. It is Compatible with
the following tooling and die application:
|
-
Anderson, VC6-FT, VC6-FTV, VC6-FTR, and
VC6-FTVR
|
| For more detailed
information, click here.
1650 CT
Series Specification Sheet. |
|
CT10
Burndy |
|
CT10 Burndy
|
CT10 Burndy accepts standard Burndy U-type
dies. It is compatible with the following tooling and die application:
|
-
Burndy, Y35, L, H
-
Alcoa, 12A, 12AC, 12HA, 12HAC and 30A
-
Anderson, HC-12 and HC-12H
-
Greenlee, 1985
-
Huskie, EP410, EP410T, EP430, EP510,
EP410HT, RP410H, EP510H, PDY-1220 and PDY-1216
-
Thomas & Betts, 12 Ton
-
Teledyne, TPU-12 BH
|
| For more detailed
information, click here.
1650 CT
Series Specification Sheet. |
|
CT10
Kearney |
|
CT10 Kearney
|
CT10 Kearney accepts standard Kearney dies. It
is compatible with the following tooling and die application:
|
|
|
| For more detailed
information, click here.
1650 CT
Series Specification Sheet. |
|
CT10
STANLEY® |
|
CT10 Stanley
|
CT10 STANLEY® 1½ in. with its unique C-frame
opening of 11/2 inches permits the operator to crimp material up to 750
MCM aluminum or copper cable. The larger opening can eliminate the need
for larger, more expensive 15 ton tools when crimping large connectors
that don’t require 15 tons of die load. The CT10 STANLEY® accepts
standard Burndy U-type dies. It is compatible with the following tooling
and die application:
|
-
Burndy, Y35, Y750 BH
-
Alcoa, 12A, 12AC, 12HA, 12HAC and 30A
-
Anderson, HC-12 and HC-12H
-
Greenlee, 1985
-
Huskie, EP410, EP410T, EP430, EP510,
EP410HT, RP410H, EP510H, PDY-1220 and PDY-1216
-
Thomas & Betts, 12 Ton
|
| For more detailed
information, click here.
1650 CT
Series Specification Sheet. |
|
CT15
Universal |
|
CT15 Universal
|
CT15 Universal head model uses die holders
that allow the tool to accommodate either Burndy, Kearney or T&B
tooling. It will accept the following dies:
|
-
Burndy, Y46, Y35
-
Kearney, PH2, PH14
|
| For more detailed
information, click here.
1650 CT
Series Specification Sheet. |
|
McCANN
Equipment Ltd.
Head
Office
10255 Cote de Liesse.
Dorval, Quebec
Canada H9P 1A3
Tel: 514-636-6344
Fax: 514-636-0365
Toronto
Office
2178 Torquay Mews.
Mississauga, Ontario
Canada L5M 2M6
Tel:
905-542-1333
Fax: 905-542-1335
Maritime
Office
5 Hardwood Crescent
Quispamsis, NB
Canada E2E 4Y6
Tel.: (506) 847-8999
Fax: (506) 847-8118
Email:
info@stanleyhydraulics.ca
|
