|
|
Cut-Off
Saws & Grinders
|
CO25
Cut-Off Saw |
|
Model DL07150 Shown
(quick couplers not included)
CO25 shown on optional 33281 cart
|
The Stanley CO25 Cut-Off Saw is used for metal
or concrete cutting. The CO25 uses standard 14 inch (355.6 mm) abrasive
or wet or dry diamond blades. It comes standard with an internal blade
brake and water attachment porting. Stanley CO25 features are:
|
-
7-9 gpm (26-34 lpm) operating range.
-
4-3/4 iinch (120.6 mm) deep maximum cut.
-
Adjustable wheel guard.
-
HYREVZ™ gear-type motor.
-
Flow regulator to prevent over speed.
-
Safety trigger.
|
| For more detailed
specifications, click on the model numbers. |
| Model |
Weight. |
Length |
Width |
Arbor Size |
Rotation / RPM |
| CO25141 |
20 lb / 9 kg |
21 in. / 53 cm |
11 in. / 28 cm |
1 in. (25.4 mm) |
CCW / 4500 |
| CO2514101* |
20 lb / 9 kg |
21 in. / 53 cm |
11 in. / 28 cm |
1 in. (25.4 mm) |
CCW / 4500 |
| CO25541 |
20 lb / 9 kg |
21 in. / 53 cm |
11 in. / 28 cm |
1 in. (25.4 mm) |
CW / 4500 |
| CO2554101* |
20 lb / 9 kg |
21 in. / 53 cm |
11 in. / 28 cm |
1 in. (25.4 mm) |
CW / 4500 |
|
|
| CE = (European Community)
Certification, includes HTMA quick disconnect couplers. |
|
GR29
Underwater Grinder |
|
 |
The Stanley GR29 Grinder is used for top,
face, and side grinding using 9 inch (228.6 mm) diameter wheels. Wire
brushes can also be used and depressed-center wheels with an optional
adapter. Stanley GR29 features are:
|
-
4-10 gpm (15-38 lpm) operating range.
-
2700 rpm @ 10 gpm (38 lpm)
-
Adjustable wheel guard.
-
Integral HYREVZ™ gear-type motor.
-
Assist handle.
|
| For more detailed
specifications, click on the model numbers. |
| Model |
Weight. |
Length |
Width |
Arbor Size |
RPM |
|
GR29310 |
14 lb / 6.4 kg |
11 in. / 28 cm |
12 in. / 30.5 cm |
5/8 in - 11 Thd |
CCW / 2700 |
|
GR2930101+ |
14 lb / 6.4 kg |
11 in. / 28 cm |
12 in. / 30.5 cm |
5/8 in - 11 Thd |
CCW / 2700 |
|
|
| CE = (European Community)
Certification, includes HTMA quick disconnect couplers. |
|
GR30
Grinder |
|
Model GR30101 Shown
|
The Stanley GR30 Grinder is used for top,
face, and side grinding using 9 inch (228.6 mm) diameter wheels. Wire
brushes can also be used and depressed-center wheels with an optional
adapter. Stanley GR30 features are:
|
-
7-9 gpm (26-34 lpm) operating range.
-
5600 rpm @ 8 gpm (30 lpm)
-
Adjustable wheel guard.
-
Integral HYREVZ™ gear-type motor.
-
Assist handle
-
Reverse-Check Valve
-
Motor run-down
-
Dual-Spool for operation on OC or CC
systems
-
Plastisol/foam handle
-
Speed limiter
-
Whip hoses and couplers
|
| For more detailed
specifications, click on the model numbers. |
| Model |
Weight. |
Length |
Width |
Arbor Size |
Rotation / RPM |
| GR30701 |
12.5 lb / 5.7 kg |
8.5 in. / 21.6 cm |
8.7 in. / 22.1 cm |
5/8 in - 11 Thd |
CCW / 5600 |
| GR3070101+ |
12.5 lb / 5.7 kg |
8.5 in. / 21.6 cm |
8.7 in. / 22.1 cm |
5/8 in - 11 Thd |
CCW / 5600 |
|
|
| CE = (European Community)
Certification, includes HTMA quick disconnect couplers. |
|
GR60
Cupstone Grinder |
|
Model GR60121S Shown
|
The Stanley GR60 Cupstone Grinder is used for
shaping and smoothing profiles using 6 inch (152.4 mm) cup wheels.
Stanley GR60 features are:
|
-
10 gpm (38 lpm) operating flow.
-
Integral shaft lock.
-
Interlocking safety trigger.
-
HYREVZ™ gear-type motor.
-
HTMA quick disconnect couplers.
-
Single latch guard height adjustment.
|
| For more detailed
specifications, click on the model number. |
| Model |
Weight. |
Length |
Width |
Arbor Size |
Rotation / RPM |
|
GR60121S |
20 lbs / 9 kg |
18 in. / 46 cm |
10.5 in. / 27 cm |
5/8 in - 11 Thd |
CCW / 6000 |
|
|
|
|
HG60
Bull-Nose Grinder |
|
Model HG60130B Shown
|
The Stanley HG60 Bull-Nose Grinder is used for
de-burring holes and grinding inside corners and curves. Stanley HG60
features are:
|
-
5-10 gpm (19-38 lpm) operating range.
-
Interlocking safety trigger.
-
HYREVZ™ gear-type motor.
-
HTMA quick disconnect couplers.
|
| For more detailed
specifications, click on the model numbers. |
| Model |
Weight. |
Length |
Width |
Arbor Size |
Rotation / RPM |
| HG60130B |
11 lbs / 5 kg |
23 in. / 58 cm |
3 in. / 8 cm |
5/8 in - 11 Thd |
CCW / 4500 |
|
|
|
|
HG80
Horizontal Grinder |
|
Model HG80110B Shown
|
The Stanley HG80 Horizontal Grinder is used
for surface touch-up of welds and de-burring using 8 inch (203 mm)
wheels. Stanley HG80 features are:
|
-
8-10 gpm (30-38 lpm) operating range.
-
Interlocking safety trigger.
-
HYREVZ™ gear-type motor.
-
HTMA quick disconnect couplers.
|
| For more detailed
specifications, click on the model numbers. |
| Model |
Weight. |
Length |
Width |
Arbor Size |
Rotation / RPM |
| HG80110B |
14 lbs / 6.4 kg |
23 in. / 58 cm |
10 in. / 25 cm |
5/8 in - 11 Thd |
CCW / 4500 |
| HG80120B |
14 lbs / 6.4 kg |
23 in. / 58 cm |
10 in. / 25 cm |
5/8 in - 11 Thd |
CW / 4500 |
|
|
|
|
McCANN
Equipment Ltd.
Head
Office
10255 Cote de Liesse.
Dorval, Quebec
Canada H9P 1A3
Tel: 514-636-6344
Fax: 514-636-0365
Toronto
Office
2178 Torquay Mews.
Mississauga, Ontario
Canada L5M 2M6
Tel:
905-542-1333
Fax: 905-542-1335
Maritime
Office
5 Hardwood Crescent
Quispamsis, NB
Canada E2E 4Y6
Tel.: (506) 847-8999
Fax: (506) 847-8118
Email:
info@stanleyhydraulics.ca
|
