1-800-663-6344
Handheld Tools
  Breakers
  Chippers & Diggers
  Crimping Tools
  Diamond Chain Saws
  Drills
  Drivers & Pullers
  Cut-Off Saws & Grinders
  Impact Wrenches
  Power Units
  Pumps
  Ventilation & Electric
  TracHorse & Mini Dump
  Tree Trimming
  Tampers
Products
  Railroad Products
Contact Us

Drills

CD10 Core Drill


Model CD10100 Shown

The Stanley CD10 Core Drill is used for drilling 5/8 in. to 6-3/8 in. (15 mm to 160 mm) diameter holes in concrete, masonry, or asphalt materials using carbide or diamond segmented bits and water lubrication. Stanley CD10 features are:
 

  • 5.8-13 gpm (22-50 lpm) operating range.

  • 3 speeds, 380, 900, and 1800 rpm.

  • Gardena quick connect water connection coupler.

  • HTMA quick disconnect couplers.

  • Drilling aid for freehand drilling assistance.

  • 1/2 x 5/8-11 in. thread adapter included.
For more detailed specifications, click on the model number.
Model Weight. Length Width Arbor Size RPM
CD10100 18.7 lb / 8.5 kg 19 in. / 48 cm 4 in. / 10 cm 1-1/4 in. UNC Male or
1/2 in. UNC Female		 380, 900, 1800

 

DL07 Drill


Model DL07150 Shown

The Stanley DL07 Drill is a 1/2 inch capacity drill for drilling in wood, metal, or masonry. Stanley DL07 features are:
 

  • 12 gpm (45 lpm) maximum operating range.

  • 1/2 in. keyed Jacobs® Chuck.

  • Assist handle.

  • Integral HYREVZ™ gear-type motor.

  • Reversable.

  • Open Center or Closed Center operation.
     
For more detailed specifications, click on the model number.
Model Weight. Length Width Chuck Size Features
DL07550 6 lb / 2.7 kg 9 in. / 23 cm 4 in. / 10 cm 1/2 in (13 mm) OC/CC - A-C
DL0755001 6 lb / 2.7 kg 9 in. / 23 cm 4 in. / 10 cm 1/2 in (13 mm) OC/CC - A-C-CE
DL07652 6 lb / 2.7 kg 9 in. / 23 cm 4 in. / 10 cm 5/8 in (17 mm) OC/CC - B-C-U/W
A = Couplers included.
B = Whip hoses included.
C = Assist handle included.
OC/CC = Can be used on Open Center or Closed Center hydraulic systems.
CE = (European Community) Certification, includes HTMA quick disconnect couplers.
U/W = Designed for underwater use.

 

HD08 Hammer Drill


Model HD08531G Shown

The Stanley HD08 Hammer Drill is a rotary, percussion tool for drilling in rock, concrete, or masonry using 1/4 to 1 inch SDS Plus type bits. The HD08 can also be used for drilling in wood or steel by turning percussion off and installing an optional chuck adapter. Stanley HD08 features are:
 

  • 3-9 gpm (11-34 lpm) operating range.

  • Percussion ON/OFF control.

  • Assist handle.

  • Depth gauge.

  • Flow control to prevent overspeed.
For more detailed specifications, click on the model number.
Model Weight. Length Width Chuck Size RPM
HD08531G 6 lb / 2.7 kg 13 in. / 35 cm 5.5 in. / 14 cm SDS Plus 1175 @ 6gpm

 

HD45 Hammer Drill


Model HD45110B Shown

The Stanley HD45 Hammer Drill is a rotary, percussion tool for drilling in concrete, masonry, or asphalt using 736 Skil hex bits. Stanley SK47 features are:
 

  • 7-9 gpm (26-34 lpm) operating flow.

  • Adjustable rotation speed up to 300 rpm.

  • Feathering ON/OFF trigger.

  • Hose whips.

  • Nitrogen charged accumulator.

  • Forward/reverse rotation control.
     
For more detailed specifications, click on the model numbers.
Model Weight. Length Width Shank Size Features
HD45110B 45 lbs / 20 kg 22 in. / 57 cm 14 in. / 35 cm Skil 736 Hex -
HD451101 45 lbs / 20 kg 22 in. / 57 cm 14 in. / 35 cm Skil 736 Hex couplers, CE
HD4511801 45 lbs / 20 kg 22 in. / 57 cm 14 in. / 35 cm Skil 736 Hex couplers, anti-vib handle, CE
HD45310 45 lbs / 20 kg 22 in. / 57 cm 14 in. / 35 cm Skil 736 Hex U/W
HD4531001 45 lbs / 20 kg 22 in. / 57 cm 14 in. / 35 cm Skil 736 Hex couplers, CE, U/W
CE = (European Community) Certification, includes HTMA quick disconnect couplers.
U/W = Designed for underwater use.

 

SK47 Sinker Drill


Model SK47130 Shown

The Stanley SK47 Sinker Drill is a rotary, percussion tool for drilling in rock or concrete using 7/8 inch hex, up to 2-inch diameter, drill steel. The SK47 can drill a 2-inch hole, 10 feet deep. The SK47 uses air to extract chips from the hole. Stanley SK47 features are:
 

  • 7-9 gpm (26-34 lpm) operating range.

  • Feathering ON/OFF trigger.

  • Adjustable rotation speed up to 300 rpm.

  • Hose whips.

  • Nitrogen charged accumulator.

  • Air connection.
For more detailed specifications, click on the model number.
Model Weight. Length Width Shank Size Air Required
SK47130 52 lbs / 24 kg 23 in. / 58 cm 14 in. / 36 cm 7/8 in hex x 4-1/4 in. 20 cfm @ 100 psi

 

SK58 Sinker Drill


Model SK58120 Shown

The Stanley SK58 Sinker Drill is a rotary, percussion tool for drilling in rock or concrete using 7/8 or 1 inch hex, up to 3-inch diameter, drill steel. The SK58 can drill a 3-inch hole, 20 feet deep. The SK58 uses air or water to extract chips from the hole. Stanley SK58 features are:
 

  • 7-9 gpm (26-34 lpm) operating flow.

  • Adjustable rotation speed up to 300 rpm.

  • Feathering ON/OFF trigger.

  • Hose whips.

  • Nitrogen charged accumulator.

  • Air or water connection with valve.
     
For more detailed specifications, click on the model numbers.
Model Weight. Length Width Shank Size Air/Water Required
SK58110 67 lbs / 30 kg 26 in. / 66 cm 18 in. / 46 cm 1 in. hex x 4-1/4 in. 30 cfm @ 120 psi
SK58120 67 lbs / 30 kg 26 in. / 66 cm 18 in. / 46 cm 1 in. hex x 4-1/4 in. 1-3 gpm @ 30 psi
SK58130 67 lbs / 30 kg 26 in. / 66 cm 18 in. / 46 cm 7/8 in. hex x 4-1/4 in. 30 cfm @ 120 psi
SK58310 67 lbs / 30 kg 26 in. / 66 cm 18 in. / 46 cm 1 in. hex x 4-1/4 in. 1-3 gpm @ 30 psi

 

  

McCANN Equipment  Ltd.

Head Office
10255 Cote de Liesse.
Dorval, Quebec
Canada H9P 1A3
Tel: 514-636-6344
Fax: 514-636-0365

Toronto Office
2178 Torquay Mews.
Mississauga, Ontario
Canada L5M 2M6
Tel: 905-542-1333
Fax: 905-542-1335
 

Maritime Office
5 Hardwood Crescent
Quispamsis, NB
Canada E2E 4Y6
Tel.: (506) 847-8999
Fax: (506) 847-8118
 
Email:
info@stanleyhydraulics.ca
©2004 McCANN Equipment Ltd - All Rights Reserved. Contact Us