|
|
Drivers
& Pullers
|
EA08
Earth Auger |
|
EA08 with Torque Tube
(auger not included)
|
The Stanley EA08 Earth Auger is used for a
wide variety of earth boring application. The EA08 can be operated with
two people or by one person using the torque tube. Stanley EA08 features
are: |
-
7-9 gpm (26-34 lpm) operating range.
-
Output torque 250 ft. lb. / 339 Nm
-
Reversible.
-
HTMA quick disconnect couplers.
-
Torque tube for one-man operation.
-
Dead-man type ON/OFF control.
|
| For more detailed
specifications, click on the model number. |
| Model |
Weight. |
Length |
Width |
Auger Size |
Auger Connection |
|
EA08101A |
47 lb / 21 kg |
11 in. / 30 cm |
46 in. / 117 cm |
Up to 18 in. dia., 42 in. long - 15 in. extensions. |
1-1/4 in. square fem |
|
EA08102A |
47 lb / 21 kg |
11 in. / 30 cm |
46 in. / 117 cm |
Up to 18 in. dia., 42 in. long - 15 in. extensions. |
1-3/8 in. hex male |
|
|
|
GD50
Ground Rod Driver |
|
GD50 Ground Rod Driver
|
The Stanley GD50 Ground Rod Drivers drive 1/2
to 1 inch rod from the top of the rod. A valve, in-line on the hoses,
permits control of the GD50 while it is slung to the top of the rod.
Stanley GD50 features are:
|
-
5-9 gpm (19-34 lpm) operating range.
-
In-line valve on hoses for ON/OFF control.
-
Assist handles.
-
Lifting eye.
-
HTMA quick disconnect couplers.
|
| For more detailed
specifications, click on the model numbers. |
| Model |
Weight. |
Length |
Width |
Rod Size |
Features |
|
GD50132RF |
52 lb / 24 kg |
25 in. / 65 cm |
16 in. / 41 cm |
1/2-5/8 in. dia |
in-line valve &
hoses |
|
GD50133RF |
52 lb / 24 kg |
25 in. / 65 cm |
16 in. / 41 cm |
3/4-1 in. dia |
in-line valve &
hoses |
|
|
|
PD45
Post Driver |
|
PD45 Post Driver
|
The Stanley PD45 Post Driver will drive #2,
#3, & #4 lb/ft "U" channel, #3 & #4 Strong Back
"U" channel, #1 delineator, up to 2-5/8 inch round, or up to
2-1/2 inch square posts. Stanley PD45 features are: |
-
7-9 gpm (26-34 lpm) operating range.
-
Lifting eye.
-
ON/OFF trigger next to guide handle (model
dependent).
-
Hose whips.
-
Nitrogen charged accumulator.
-
Guide handles.
-
In-line valve.
-
Extended anvil for driving posts within 4
inches of the ground.
|
| For more detailed
specifications, click on the model numbers. |
| Model |
Weight. |
Length |
Width |
| PD45131 |
65 lbs / 29 kg |
30 in. / 76 cm |
10 in. / 25 cm |
| PD45132 |
65 lbs / 29 kg |
30 in. / 76 cm |
10 in. / 25 cm |
| PD45132G |
65 lbs / 29 kg |
30 in. / 76 cm |
10 in. / 25 cm |
|
|
|
PP10
Post Puller |
|
PP10 Post Puller
|
The Stanley PP10 Post Puller is the ideal tool
for pulling any type of post up to 8 inches wide. Stanley PP10 features
are:
|
-
3-9 gpm (11-34 lpm) operating range.
-
9800 lb pulling force.
-
Carrying handle.
-
UP/NEUTRAL/DOWN control valve.
-
Built-in grips for "U" channel
posts.
-
Chain & pins for irregular &
perforated posts.
|
| For more detailed
specifications, click on the model number. |
| Model |
Weight. |
Length |
Width |
Capacity |
Features |
|
PP10100 |
70 lbs / 32 kg |
13 in. / 32 cm |
14 in. / 36 cm |
up to 8 in. wide post |
HTMA Couplers |
|
|
|
|
McCANN
Equipment Ltd.
Head
Office
10255 Cote de Liesse.
Dorval, Quebec
Canada H9P 1A3
Tel: 514-636-6344
Fax: 514-636-0365
Toronto
Office
2178 Torquay Mews.
Mississauga, Ontario
Canada L5M 2M6
Tel:
905-542-1333
Fax: 905-542-1335
Maritime
Office
5 Hardwood Crescent
Quispamsis, NB
Canada E2E 4Y6
Tel.: (506) 847-8999
Fax: (506) 847-8118
Email:
info@stanleyhydraulics.ca
|
